Since the early days in 2002, Abitana has been specialized in transmitting TV and video signals over Twisted Pair cabling.
We offer solutions for every environment: residential, multiple dwelling units like nursing homes, service flats and student homes, leisure centres, hotels, hospitals, offices, shops, digital signage,… and for every type of TV-signal.
(go directly to the application schemes)
If you think about it for a moment, you realise that de concept “TV-signal” has known an enormous evolution in this period. In 2000, TV-signal stood for standard definition and analogue signals, nothing more, nothing less. Now, hardly 15 years later, almost all TV and video signals are digital, HD is standard and Ultra HD, 4K is becoming more popular every day. And although we watch the same movie, there is no longer one single type of signal that delivers the content to your television set. Next to RF-distribution, a good and performant network, must also be able to transmit HDMI signals and IP-TV.
It goes without saying that the requirements for your cabling increase every day. The following graph gives you a clear picture of the most popular Twisted Pair cables and the current applications.
If you want to transmit broadband RF television signals ( UHF-band, cable television) problem-free and without a second thought over a Twisted Pair cable, the cable pair you are using should be able to transmit signals up to 1000MHz.
Thinking about HDMI? A 4K HDMI signal will need 400MHz.
IP-TV uses the Ethernet LAN. For the moment 1GbE is still acceptable, but this will without a doubt evolve to 10Gigabit Ethernet in the near future.
Because cabling is part of the fixed building infrastructure it has a very long lifespan. That’s why you should not make compromises and install a very performant cable, like the OmniMedia HD1000 F²/FTP Triple shield.A cable that meets the highest requirements of today’s technology and is ready for the future.
Indeed, it is not always possible to consider an entirely new cabling infrastructure.
If you have Cat7A, Grade3 or Grade3S cabling, you can be fairly sure that you will be able to transmit the UHF-band without problems, but please do consult us prior to installation.
If you have OmniMedia HD1000 F²/FTP in place, you can sleep on both ears, transmission of the UHF band is guaranteed.
In case another type of less performant cable is in place, the answer is not always straightforward. Nevertheless there will still be a lot of possibilities for the transmissions of TV signals.
But bear in mind that there will also be limitations. A lot of factors will play a significant role.
The standard for the classification of Twisted Pair cable comes from the office environment.
It defines the highest signal frequencies that can be transmitted over a cable without any problems for a maximum cable length of 90m and in all circumstances.
The performance of a certain cable above these frequencies remains unknown. It could still be okay, but it is not mentioned in the specification and there can be significant differences between brands and cable types. You also want to avoid that your cabling itself will start acting as an antenna and transmitting interference signals. That’s why your TV-channels should be placed within the frequency range of the installed cable.
The lower the category or specified maximum frequency, the less channels you will be able to transmit over your cable.
In a lot of projects the actual cable lengths come nowhere near 90m.
The shorter the cables, the lesser the skew between the pairs and the smaller the likelihood of interference problems.
The available power of your amplifier will have to be shared by all the channels you want to distribute. Or in other words: if you want to transmit only a single channel (as in f.i. a Digital Signage application), the length that can be bridged will be significant higher than when you need to transmit tens of channels or the entire UHF band.
The better the shielding of you cable, the smaller the chance that interference signals in the environment will disturb the transmission. For the distribution of RF signals a shielded cable is desirable.
Needless to say that this is a significant factor, but quite often you have no control over it. With a good signal source, you will get better results.
Every technology available for the transmission of TV signals (RF DVB-C, RF DVB-T, HDMI, IP) will have its own specific features, possibilities and limitations.
An example: Devices for DVB-T signals ("Digital Video Broadcasting — Terrestrial") will be more tolerant than those for DVB-C ("Digital Video Broadcasting — Cable"). An advantage when you want to cover exceptional distances with a less performant cable.
If you want to transmit RF signals over Twisted Pair cabling, you need to position the channels within, or as close as possible to the specified frequencies of the installed cable.
As you surely realise by now, external factors will play a significant role. This means the possibilities for sending TV over existing Twisted Pair cabling will differ from one project to another.
To give you an idea of what is normally speaking feasible for a certain type op Twisted Pair cabling, we want to share our knowledge with you.
Tell us about your project, the type of cabling, the lengths involved, the technology you want to use, your expectations,…
Based on our years of experience, measurements and realised projects, we will be able to give you a pretty good idea of the possibilities.
We advise, especially for large projects, to carry out a professional audit that will define the possibilities and limitations of your cabling.
If this is not possible, a simple test with our equipment will tell you if your goal can be reached.
Abitana’s HD 1000MHz technology products, were especially designed for the transmission of TV signals over Twisted Pair cabling.
The performance of an OmniMedia HD1000 MHz cable, is comparable to a Cat7A cable, with one big difference.
The standard for the classification of Twisted Pair cable comes from the office environment and defines a length of 90m. In a lot of projects this length is never reached.
Abitana designed and guarantees the specifications of the OmniMedia HD1000 MHz cable for maximal installation lengths of 40m. More than enough for most residential projects.
This has a huge advantage. Compared to a standard Cat7A cable, the OmniMedia cable has a significantly smaller diameter and bending radius. It remains very flexible and it is a lot easier to install and connect in f.i. wall boxes.
One tends to forget, but a network is only as good as its weakest link.
Every part of your cabling infrastructure has to meet these high specifications. Not only the Twisted Pair cable itself, but also all the connectors and patch cords you are going to use.
Our shielded RJ45 connectors for DIN rail (AB-DC2006S00) or keystone (ABI-CP2006S00) mounting offer an excellent EMC shield for the entire frequency range.
As was said before, a “TV-Signal” can take different shapes (RF, HDMI,IP).
The following schematics show you some of the possibilities for the distribution of TV over Twisted Pair.
By using abitana’s TV over Twisted Par RF amplifier, the whole broadband signal (all the channels) will be sent over the network. The desired TV-channel will be selected on the receiving side.
The wiring scheme for 1 to 4 television sets, suitable for small or medium sized homes, uses the ABI-EV2000S00 TV over Twisted Pair amplifier with 4 RJ45 outputs.
If you want to connect more televisions, you can create clusters from 1 to 12 TV’s, scalable to more than 256 TV’s in groups of 4 outputs.
This wiring scheme can be used for large residential buildings or for multiple dwelling units (like hotels, student homes, service flats, …). It uses the Master TV over Twisted Pair amplifier (ABI-EV2008S00) onto witch max 2 slave modules (ABI-EV2014S00) can be connected.
If you prefer to distribute the TV signal over the IP network, you can make use of our DIN-rail mounted Gigabit Ethernet switch (ABI-EL3008S00)
This solution uses a DVB-T modulator (with 1 or 4 inputs) that will transform the HDMI signal of your video source to a digital, Full-HD RF-signal. The output of the modulator can then be distributed, like any other RF signal, over you Twisted Pair network, by using abitana’s TV over Twisted Pair amplifiers, as explained above.
It’s an excellent alternative for the use of a HDMI-matrix. It is more robust and the fact that the DVB-T technology is a lot less sensitive to interferences, means that higher cable lengths can be reached.
Read our article “Multiroom HDMI: modulator or matrix?” to learn more about the differences and advantages.
Download the datasheets (ABI-EV20XXS00, ABI-MD3001S0T, ABI-MD3004SCT) or visit our online catalogue/shop: TV-Radio distribution or TV VHF-UHF modulation for more information.
Please feel free to contact us if you would like more information about the use of HDMI-modulators or the distribution of TV/video signals over Twisted Pair cabling in your project.
Download the TV over Twisted Pair brochure.